植物生态学报 ›› 2024, Vol. 48 ›› Issue (12): 1683-1691.DOI: 10.17521/cjpe.2024.0044  cstr: 32100.14.cjpe.2024.0044

• 研究论文 • 上一篇    下一篇

基于叶形分类的木本植物单叶片面积预测模型

陈香蕾1(), 崔树娟1, 赵晨军1, 顾洪亮1, 陈晓萍2,3, 李锦隆3, 孙俊1,3,*()   

  1. 1安庆师范大学资源环境学院, 安徽安庆 246052
    2枣庄学院旅游与资源环境学院, 山东枣庄 277160
    3福建师范大学地理科学学院, 福州 350007
  • 收稿日期:2024-02-08 接受日期:2024-08-23 出版日期:2024-12-20 发布日期:2024-12-20
  • 通讯作者: *孙俊(sunjunfjnu@aliyun.com)
  • 基金资助:
    国家自然科学基金(32071555)

Predictive model of single leaf area for woody plants based on leaf morphology classification

CHEN Xiang-Lei1(), CUI Shu-Juan1, ZHAO Chen-Jun1, GU Hong-Liang1, CHEN Xiao-Ping2,3, LI Jin-Long3, SUN Jun1,3,*()   

  1. 1School of Resources and Environment, Anqing Normal University, Anqing, Anhui 246052, China
    2College of Tourism and Resources Environment, Zaozhuang University, Zaozhuang, Shandong 277160, China
    3College of Geographical Science, Fujian Normal University, Fuzhou 350007, China
  • Received:2024-02-08 Accepted:2024-08-23 Online:2024-12-20 Published:2024-12-20
  • Contact: *SUN Jun(sunjunfjnu@aliyun.com)
  • Supported by:
    National Natural Science Foundation of China(32071555)

摘要: 植物叶片形态特征和叶面积反映了植物重要的生理生态功能。该研究在不同物种中建立椭圆形和披针形2种叶片形态的叶面积预测模型, 以便无损、准确地预测叶面积的变化。采集了亚热带3个研究区59个物种, 共计4 061片叶片, 利用叶面积与叶片长度、叶片宽度之间的关系进行建模, 同时与叶片实际面积进行比较, 采用均方根误差、决定系数和预测精度来检验模型的适用性。结果表明: 1)不同物种叶面积的大小与叶片长度、叶片宽度间均存在显著的线性相关关系, 受长宽积的影响最大, 其相关系数为0.997; 2)以长宽积为自变量建立椭圆形和披针形叶面积分类预测模型, 其均方根误差为0.996和1.017, 决定系数分别为0.998和0.990, 分类预测精度为95.32%和94.89%, 且优于整体拟合精度92.76%; 3)进一步研究发现, 基于物种叶片长宽比均值分类的预测模型精度分别为95.53%和94.86%, 且预测模型精度随着物种间叶片长宽比变异系数增大而显著降低。该研究基于叶片形态分类建立的以长宽积为自变量的叶面积预测模型, 可以为椭圆形和披针形叶面积的快速测定提供便捷的方法。同时, 细分叶片形态能够增加模型的准确性, 减少叶片长宽比变异对叶面积预测模型的影响。

关键词: 分类拟合, 椭圆形叶片, 叶片长宽积, 叶形, 披针形叶片

Abstract:

Aims Leaf morphology and area variations are essential for understanding plant physiological and ecological functions. This study aims to develop non-destructive and accurate prediction models for leaf area with elliptical and lanceolate shapes across different species.

Methods A total of 4 061 leaf samples from 59 species across three subtropical natural reserves were collected. The relationships between leaf area and leaf length, width were modeled, and modeled leaf areas were compared with actual leaf areas. Model suitability was evaluated through root mean square error, coefficient of determination, and prediction accuracy.

Important findings The results indicate: 1) Significant linear correlations exist between leaf area and leaf length, width across different species, with the product of length and width having the most significant impact, achieving a correlation coefficient of 0.997. 2) Models based on length-width products for elliptic and lanceolate leaves showed root mean square errors of 0.996 and 1.017, determination coefficients of 0.998 and 0.990, and prediction accuracies of 95.32% and 94.89%, surpassing the overall accuracy of 92.76%. 3) Further analysis showed predictive model accuracy of 95.53% and 94.86%, based on mean length-to-width ratios of 59 species, decreasing as leaf length-to-width ratio increased. Therefore, these shape-classified models, using length-width products, offer a quick, accurate method for estimating leaf area in elliptic and lanceolate leaves. Additionally, refining leaf morphology classification improves model accuracy and minimizes the effect of length-to-width ratio variation on predictions.

Key words: classified fitting, elliptical leaf, leaf length-times-width, leaf shape, lanceolate leaf